Vibra Tite 111 (Purple) - 250 ML
Low Strength Threadlocker
(For fasteners under 1/4")

Vibra-TITE 11125 Low Strength Threadlocker is a thixotropic anaerobic threadlocker designed for easy disassembly of threaded components. The anaerobic nature cures only when confined between two metal parts. The products low removal torque allows easy disassembly yet provides vibration and shock resistance. Typical Applications Best for small fasteners under 1/4" where prevention of vibrational loosening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners.

Compare to Loctite 222

Technical Features
Resin:..................................Dimethylacrylate
Color:....................................Purple
Fixture Speed w/Primerﾅﾅﾅ...<5 seconds
Fixture Speed w/out Primer 20 min. @ 77/F
Viscosity (Thixotropic).........1200-5000 cps
Gap Fill..................................0.007"
Shelf Life.........................12 months @ 68ﾰF
Max. Operating Tempﾅﾅ -65ﾰF to +300ﾰF

Cured Performance
Full Cure Time.................24 hours @ 68ﾰF
Typical Breakaway Strength...50-100 in.lbs.
Typical Prevailing Strength......20-50 in.lbs.


Vibra-TITE 11125 is suitable for most small diameter, fine threaded screws, nuts and bolts. Not recommended on certain plastics as stress cracking may occur. Vibra-TITE VC-3ﾙ Original may be a possible alternative solution (compatibility must be tested). Some anti-corrosion chemicals inhibit the cure system in this type of anaerobic and use of primer may be required under these conditions. Product conforms to MIL-S-46163A , ASTM D-5363, NSF.

250 Ml Bottle

Vibra-Tite 111 SDS

The product image shown may not represent actual product

Made In Michigan