Vibra Tite 131 - 10 ML
Permanent Strength Threadlocker
(For Fasteners up to 1" in Diameter)

Vibra-Tite 131 is a high-strength, anaerobic, threadlocking compound. Designed for permanent locking of threaded fasteners, up to 1", Vibra-Tite 131 is compatible with aluminum, steel, plated, stainless steel and special alloy parts. Ideal for use in applications where shock or vibration may cause the fastener to loosen. This anaerobic threadlocker demonstrates excellent temperature, environmental and solvent resistance.

Recommended for use on permanent applications only. Red threadlock strength is measured by the amount of torque required to break the bond. Most lockers that fall in this category will require anywhere from 200-400 PSI of torque, and/or heat, to break the initial bond. This product should not be used on most plastics, as stress cracking can occur.

MADE IN MICHIGAN!!

Technical Features
Resin:................................. Dimethylacrylate
Color:.......................Red
Fixture Speed w/Primer......<5 seconds
Fixture Speed w/out Primer...30 min. @ 77ﾰF
Viscosity (Thixotropic)......1800-5000 cps
Gap Fill.....................0.007"
Shelf Life...................12 months @ 68ﾰF
Max. Operating Temp.........-65ﾰF to +300ﾰF


Cured Performance
Full Cure Time.................24 hours @ 68ﾰF
Typical Breakaway Strength.....150-250 in.lbs.
Typical Prevailing Strength....50-150 in.lbs.


10 ml. Bottle
Compare to Loctite 26221

Vibra-Tite SDS (US)

Vibra-Tite TDS